UniFi Access Door Hub Mini 1.5.18 includes the following bugfixes.

Bugfixes

• Fixed an issue that could cause device instability when provisioning large port configurations.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

UniFi Access Door Hub Mini 1.5.16 includes the following bugfixes.

Bugfixes

• Fixed compatibility issues with Double-Badge Override on G6 Entry and G6 Pro Entry.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

UniFi Access Door Hub Mini 1.5.14 includes the following improvements.

Improvements

• Added support for Double Badge to Override Unlock Period, allowing people to end or resume a scheduled unlock by authenticating twice. Requires Access application 4.2.16 or later.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

UniFi Access Door Hub Mini 1.4.7 includes the following bugfixes.

Bugfixes

• Fixed relay state not remaining unlocked after reboot when Always Unlock is enabled.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

UniFi Access Door Hub Mini 1.4.3.0 includes the following bugfixes.

Bugfixes

• Fixed a time zone mismatch between holiday schedules and the console.

Additional information

If you encounter any issues with this release, please provide us with the latest support file by navigating to Site Manager > UniFi Console > Access > Devices > select the device > Settings > Download Support File.

UniFi Access Door Hub Mini 1.3.4.0 includes the following improvements.

Improvements

• Supports 2-step authentication. Requirements:
• Access 3.3.24 or later
• UA G2 Pro 1.10.32 or later
• UA G3 Pro 1.10.30 or later
• UA Intercom 1.7.28 or later
• UA G3 Intercom 1.7.29 or later

Additional information

If you encounter any issues with this release, please provide us with the latest support file at Site Manager > UniFi Console > Access > Devices > Door Hub Mini > Settings > Download Support File.

UniFi Access Door Hub Mini 1.2.9.0 includes the following improvements and bugfixes.

Improvements

• Optimized door unlocking response time.

Bugfixes

• Fixed a potential issue that could cause the Hub Door Mini to run out of memory and go offline.
• Fixed an issue where doors sometimes could not be unlocked.
• Fixed an issue where UA Hub Door Mini, when paired with Protect cameras, sometimes crashed while setting up an unlock schedule or temporary unlock.

Additional information

• If you encounter any issues with this release, please provide us with the latest support file at Site Manager > UniFi Console > Access > Devices > select the hub > Settings > Download Support File.
• This version is rolling out gradually. If you haven't received it yet, please wait. It will be available within the next few days. To update manually, download the firmware from the provided link, then go to Site Manager > UniFi Console > Access > Devices > select your device > Settings > Manual Firmware Update.

UniFi Access Door Hub Mini 1.1.7.0 includes the following improvements and bugfixes.

Improvements

• Added support for the following features in Access application > Dashboard > hover over a location > Settings > Unlock Schedule. Requires Access application 3.0.34 or later.
• Unlock doors for a specific duration.
• End the Leave Unlocked schedule ahead of time.
• Always keep doors locked. Users can only unlock doors remotely or by using a physical button.

Bugfixes

• Fixed a potential device offline issue.
• Fixed an issue where unlocking the door required a 1-2 minute wait after a version update.

UniFi Access Door Hub Mini 1.0.6.0 includes the following improvements and bugfixes.

Improvements

• Support visitors to unlock doors with QR codes. Requires UA-Intercom 1.4.15.0 or later.
• Optimized Mobile Unlock performance. Requirements:
• Access Reader
• UA-Pro 2.10.17 or later
• UA-G2-Pro 1.7.14 or later
• UA-Intercom 1.4.15.0 or later
• UA-G2 3.12.9.0 or later
• UA-Lite 3.12.9.0 or later
• UniFi Identity Endpoint
• iOS 2.2.2 or later
• Android 2.3.0 or later
• Identity Enterprise app
• iOS 2.2.2 or later
• Android 2.3.0 or later
• Support setting the hub terminal's trigger level in Access application > Devices > select the hub > Settings > Terminal Manager. Requires the Access application 2.5.0 or later:
• Set the Button's trigger level to "Close Active (NO)" or "Open Active (NC)."
• Set the Door Position's trigger level to "Close Active (NO)" or "Open Active (NC)."
• Optimized the door unlock response speed.

Bugfixes

• Fixed an issue where the hub went offline frequently.
• Fixed an issue where doors could not be unlocked.
• Fixed an issue where devices connected to the hub were incorrectly displayed as offline.
• Fixed an issue where an Access Reader might not receive power after the hub restarted following a power outage.
• Fixed an issue where unlock activities in Insights and System Log were logged as entries when the Access Reader's direction was set to exit.
• Fixed an issue where the door was not unlocked promptly via the request-to-exit device.
• Fixed an issue where the LED indicator's flash behavior was incorrect.
• Fixed an issue where the PoE port's LED displayed the wrong color when Emergency Lockdown or Emergency Evacuation mode was activated.
• Fixed an issue where the uptime for an unadopted hub was displayed incorrectly in the Access application.
• Fixed an issue where incorrect feedback was sent to an Access Reader when a user's entry was denied.
• Fixed an issue where connecting a door position sensor to the hub before the hub was adopted caused the door status to display incorrectly.
• Fixed an issue where unlock recordings were not displayed in Access application > System Log > Unlocks following door unlock events. 
• Fixed an issue where an Access Reader connected to the hub could not be restarted on the Access application.